Slim, lightweight outdoor LED display panels engineered for fixed installations that demand high brightness, contrast, durability, and long-term reliability.
Designed for outdoor signage, DOOH, building facades, and media architecture, FX Media delivers IP66-rated protection, front or rear service access, efficient heat dissipation, and optional smooth curve or seamless right-angle corner configurations for creative naked-eye 3D installations.
Slim, high-brightness outdoor LED panel for fixed-install signage, DOOH, facades, and creative naked-eye 3D corner applications.
| Pixel pitch | 5 mm |
|---|---|
| Pixel density | 40,000 /m² |
| Panel dimensions | 960 × 960 × 100.5 mm |
| Brightness | ≥6,500–10,000 nits |
| Refresh rate | 3,840 Hz+ |
| Contrast ratio | 5,000:1 |
| Grayscale | 14-bit |
| Viewing angle | 160° / 160° |
| IP rating | IP66 |
| Service access | Front or Rear Available |
FX Media is an outdoor fixed-installation LED display platform for DOOH advertising, building façades, outdoor retail displays, transportation hubs, sports and entertainment venues, roadside signage, and media architecture. Its 960 × 960 mm cabinets build large-format, public-facing display surfaces from a single repeatable panel size, so a design can scale from a single sign to a full façade without changing hardware.
FX Media is offered in P5, P6.67, P8, and P10 pixel pitches. All four share the same 960 × 960 × 100.5 mm cabinet, so pitch changes resolution rather than footprint: each panel carries 192 × 192 pixels at P5, 144 × 144 at P6.67, 120 × 120 at P8, and 96 × 96 at P10. Finer pitches suit displays viewed from closer range, while coarser pitches suit larger surfaces seen from greater distances. Our LED display buying guide explains how viewing distance and pixel pitch relate.
Every FX Media model is rated at ≥6,500–10,000 nits with a 5,000:1 contrast ratio, 14-bit grayscale, a 3,840 Hz+ refresh rate, and 160° / 160° viewing angles. Cabinets are IP66-rated front and rear, operate from -20°C to +45°C, carry a 100,000-hour lifetime rating, and are listed with CE, ETL, and FCC Class A certifications.
FX Media supports project-specific smooth curve configurations, so the LED surface can follow architectural geometry on exterior media walls and building wraps. Seamless 90° right-angle corner configurations carry content around building corners — the format used for naked-eye 3D corner content. Curve capability is engineered per project rather than fixed to a catalog radius.
For geometries beyond curves and corners, see our custom LED display systems.
Each 27 kg / 60 lb panel is built from six 480 × 320 mm modules and supports front or rear service access, which can be specified to match how the structure will be maintained. Power planning should allow for up to 650 W per panel maximum and 215 W average on P5, and up to 450 W maximum and 150 W average on P6.67, P8, and P10, with 110–240 V / 50–60 Hz input.
Outdoor installations may require project-specific structural engineering, wind-load review, service access planning, power distribution, thermal review, and permitting. Final design is confirmed by X LED Systems before order or installation.
For a finer-pitch weather-rated display, compare the XUHD GOB outdoor series. For modular LED tiles used in engineered outdoor activations, see X-Tiles. You can also review all outdoor LED display solutions or browse our completed LED display projects.
Start sizing an FX Media wall in the LED system configurator, or contact X LED Systems to scope your outdoor project.